Extension Cables



Extension Cables
Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This extension cable, specifically designed for the Philips Hue Lightstrip system, enables you to create a break in your LED lightstrips instead of having only one continuous lightstrip. The possibilities are endless! You can run lights under cabinets with a break over the sink, create sharply defined lighting on a series of shelves, or even connect lightstrips across an entire room. Our cables are flexible and flat, which makes them inconspicuous - perfect for designing your ideal lighting setup! NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory Controller to 6-Pin adapter to do so. This product is great for...
Important things to keep in mind...
|
---|
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
Extension Cables
Returns and refunds:
To view our returns and refunds policy, please click here.
Warranty:
Configure Your Selection:
Price
Extension Cables
Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This extension cable, specifically designed for the Philips Hue Lightstrip system, enables you to create a break in your LED lightstrips instead of having only one continuous lightstrip. The possibilities are endless! You can run lights under cabinets with a break over the sink, create sharply defined lighting on a series of shelves, or even connect lightstrips across an entire room. Our cables are flexible and flat, which makes them inconspicuous - perfect for designing your ideal lighting setup! NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory Controller to 6-Pin adapter to do so. This product is great for...
Important things to keep in mind...
|
---|
Configure Your Selection:
Price
PRICE
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
Extension Cables
Returns and refunds:
To view our returns and refunds policy, please click here.
Warranty: