Controller to 6-Pin Adapter (detachable)



Controller to 6-Pin Adapter (detachable)
Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This controller to 6-pin adapter, specifically designed for the Philips Hue Lightstrip system, allows for any Litcessory product or a Philips Lightstrip Plus Extension to be connected directly to a Philips Hue Lightstrip Plus controller. There are two version of this adapter, a hardwired version and a detachable version. You will need to identify which version you need by looking at your Philips Hue Lightstrip Plus controller. These adapters solve the issue created by the starter lightstrip either being directly attached to the controller (the Hardwired Version) or the issue created by the controller’s connector size being smaller than any Litcessory product or a Philips Hue Lightstrip Plus Extension (the Detachable Version). One adapter connects to the controller and the other attaches to the starter lightstrip. Once both adapters are attached, it will provide a 6-pin connection between the controller and the starter lightstrip that can be used to attach any Litcessory product or a Philips Hue Lightstrip Plus Extension. This product is great for
MADE FOR INDOOR DRY LOCATIONS ONLY |
---|
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
Returns and refunds:
To view our returns and refunds policy, please click here.
Warranty:
Configure Your Selection:
Price
Controller to 6-Pin Adapter (detachable)
Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This controller to 6-pin adapter, specifically designed for the Philips Hue Lightstrip system, allows for any Litcessory product or a Philips Lightstrip Plus Extension to be connected directly to a Philips Hue Lightstrip Plus controller. There are two version of this adapter, a hardwired version and a detachable version. You will need to identify which version you need by looking at your Philips Hue Lightstrip Plus controller. These adapters solve the issue created by the starter lightstrip either being directly attached to the controller (the Hardwired Version) or the issue created by the controller’s connector size being smaller than any Litcessory product or a Philips Hue Lightstrip Plus Extension (the Detachable Version). One adapter connects to the controller and the other attaches to the starter lightstrip. Once both adapters are attached, it will provide a 6-pin connection between the controller and the starter lightstrip that can be used to attach any Litcessory product or a Philips Hue Lightstrip Plus Extension. This product is great for
MADE FOR INDOOR DRY LOCATIONS ONLY |
---|
Configure Your Selection:
Price
PRICE
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
Returns and refunds:
To view our returns and refunds policy, please click here.
Warranty: