6-Pin to Cut-End Connector



6-Pin to Cut-End Connector
Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This 6-pin to cut-end connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect a cut lightstrip to an uncut Philips Hue Lightstrip Extension or any other Litcessory product (extension cable, splitter, etc.). No more wasting costly lightstrip pieces! NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory Controller to 6-Pin adapter to do so. This product is great for
MADE FOR INDOOR DRY LOCATIONS ONLY |
---|
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
Cut-End Connector:
To connect two cut Philips Hue lightstrips together with a Litcessory Extension Cable you will need our Cut-End to 6-Pin Extension cables. This cable has a cut-end connector on one side and a 6-pin connector on the other side.
- Connect to cut-end connector side of the cable to the cut Philips Hue lightstrip.
- Plug the extension cable into the 6-pin side of the Cut-End to 6-pin cable.
- Connect a second Cut-End to 6-Pin cable to the other cut lightstrip
- The extension cable now has two 6-pin connectors to plug into between the two cut lightstrips. All Litcessory products with male pin headers are removable, so you can make them male or female as needed for your project.
Returns and refunds:
To view our returns and refunds policy, please click here.
Warranty:
Configure Your Selection:
Price
6-Pin to Cut-End Connector
Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This 6-pin to cut-end connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect a cut lightstrip to an uncut Philips Hue Lightstrip Extension or any other Litcessory product (extension cable, splitter, etc.). No more wasting costly lightstrip pieces! NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory Controller to 6-Pin adapter to do so. This product is great for
MADE FOR INDOOR DRY LOCATIONS ONLY |
---|
Configure Your Selection:
Price
PRICE
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
Cut-End Connector:
To connect two cut Philips Hue lightstrips together with a Litcessory Extension Cable you will need our Cut-End to 6-Pin Extension cables. This cable has a cut-end connector on one side and a 6-pin connector on the other side.
- Connect to cut-end connector side of the cable to the cut Philips Hue lightstrip.
- Plug the extension cable into the 6-pin side of the Cut-End to 6-pin cable.
- Connect a second Cut-End to 6-Pin cable to the other cut lightstrip
- The extension cable now has two 6-pin connectors to plug into between the two cut lightstrips. All Litcessory products with male pin headers are removable, so you can make them male or female as needed for your project.
Returns and refunds:
To view our returns and refunds policy, please click here.
Warranty: