Product Description
This controller to 6-pin adapter, specifically designed for the Philips Hue Lightstrip system, allows for any Litcessory product or a Philips Lightstrip Plus Extension to be connected directly to a Philips Hue Lightstrip Plus controller. There are two version of this adapter, a hardwired version and a detachable version. You will need to identify which version you need by looking at your Philips Hue Lightstrip Plus controller.
These adapters solve the issue created by the starter lightstrip either being directly attached to the controller (the Hardwired Version) or the issue created by the controller’s connector size being smaller than any Litcessory product or a Philips Hue Lightstrip Plus Extension (the Detachable Version).
One adapter connects to the controller and the other attaches to the starter lightstrip. Once both adapters are attached, it will provide a 6-pin connection between the controller and the starter lightstrip that can be used to attach any Litcessory product or a Philips Hue Lightstrip Plus Extension.
This product is great for:
- Any custom lighting setup where a Litcessory extension cable is placed between the controller and the first strip of lights
- Installations where the controller needs to be placed in a different location than the first strip of lights (for example, to reach a power source)
Specifications
| Documentation | Litcessory Hue Product Line |
| Warranty | Two Years Limited Warranty |
Notes
|
|
I have a cut Philips Hue lightstrip and I need to add a Litcessory extension cable and connect another cut Philips Hue lightstrip. How do I do this?
To connect two cut lightstrips together with a Litcessory Extension Cable, you will need to use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
- Connect the cut-end connector side of the cable to the cut lightstrip.
- Plug the extension cable into the 6-pin side of the 6-Pin to Cut-End Connector.
- Connect a second 6-Pin to Cut-End Connector to the other cut lightstrip
I used a cut-end connector and now my lightstrip colors don’t match. How do I fix this?
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
Can I insert a 6-pin connector into a cut-end connector?
No, you cannot insert a 6-pin connector into the cut-end connector. If you need to connect a lightstrip with a 6-pin to cut-end connector, you will need to use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Remember: Cut lightstrips connect only to cut-end connectors and 6-pin ends can only connect to 6-pin connectors. Cut lightstrips cannot connect to a 6-pin connector.
I have a cut Philips Hue Lightstrip Plus. How do I connect another Philips Hue Lightstrip to it?
If you are connecting the cut lightstrip to another cut lightstrip, you can use either of your cut-end to cut-end connectors: a Cut-End to Cut-End Connectors or a Cut-End to Cut-End Extensions Connector.
If you connecting the cut lightstrip to an uncut Philips Extension Lightstrip or a Litcessory product, you can use any of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End Connector (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Can I plug an extension cable into a Cut-End Connector?
No, to connect an extension cable to a cut lightstrip, you will need to first use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
What is reverse polarity, and how do I fix it?
Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed. Please take a look at our Troubleshooting Video.
I have a cut Philips Hue lightstrip and I need to add a Litcessory extension cable and connect another cut Philips Hue lightstrip. How do I do this?
To connect two cut lightstrips together with a Litcessory Extension Cable, you will need to use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
- Connect the cut-end connector side of the cable to the cut lightstrip.
- Plug the extension cable into the 6-pin side of the 6-Pin to Cut-End Connector.
- Connect a second 6-Pin to Cut-End Connector to the other cut lightstrip
I used a cut-end connector and now my lightstrip colors don’t match. How do I fix this?
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
Can I insert a 6-pin connector into a cut-end connector?
No, you cannot insert a 6-pin connector into the cut-end connector. If you need to connect a lightstrip with a 6-pin to cut-end connector, you will need to use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Remember: Cut lightstrips connect only to cut-end connectors and 6-pin ends can only connect to 6-pin connectors. Cut lightstrips cannot connect to a 6-pin connector.
I have a cut Philips Hue Lightstrip Plus. How do I connect another Philips Hue Lightstrip to it?
If you are connecting the cut lightstrip to another cut lightstrip, you can use either of your cut-end to cut-end connectors: a Cut-End to Cut-End Connectors or a Cut-End to Cut-End Extensions Connector.
If you connecting the cut lightstrip to an uncut Philips Extension Lightstrip or a Litcessory product, you can use any of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End Connector (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Can I plug an extension cable into a Cut-End Connector?
No, to connect an extension cable to a cut lightstrip, you will need to first use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
What is reverse polarity, and how do I fix it?
Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed. Please take a look at our Troubleshooting Video.
I used a cut-end connector and now my lightstrip colors don’t match. How do I fix this?
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
Can I insert a 6-pin connector into a cut-end connector?
No, you cannot insert a 6-pin connector into the cut-end connector. If you need to connect a lightstrip with a 6-pin to cut-end connector, you will need to use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Remember: Cut lightstrips connect only to cut-end connectors and 6-pin ends can only connect to 6-pin connectors. Cut lightstrips cannot connect to a 6-pin connector.
I have a cut Philips Hue Lightstrip Plus. How do I connect another Philips Hue Lightstrip to it?
If you are connecting the cut lightstrip to another cut lightstrip, you can use either of your cut-end to cut-end connectors: a Cut-End to Cut-End Connectors or a Cut-End to Cut-End Extensions Connector.
If you connecting the cut lightstrip to an uncut Philips Extension Lightstrip or a Litcessory product, you can use any of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End Connector (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Can I plug an extension cable into a Cut-End Connector?
No, to connect an extension cable to a cut lightstrip, you will need to first use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
I used a cut-end connector and now my lightstrip colors don’t match. How do I fix this?
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
Can I insert a 6-pin connector into a cut-end connector?
No, you cannot insert a 6-pin connector into the cut-end connector. If you need to connect a lightstrip with a 6-pin to cut-end connector, you will need to use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Remember: Cut lightstrips connect only to cut-end connectors and 6-pin ends can only connect to 6-pin connectors. Cut lightstrips cannot connect to a 6-pin connector.
I have a cut Philips Hue Lightstrip Plus. How do I connect another Philips Hue Lightstrip to it?
If you are connecting the cut lightstrip to another cut lightstrip, you can use either of your cut-end to cut-end connectors: a Cut-End to Cut-End Connectors or a Cut-End to Cut-End Extensions Connector.
If you connecting the cut lightstrip to an uncut Philips Extension Lightstrip or a Litcessory product, you can use any of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End Connector (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Can I plug an extension cable into a Cut-End Connector?
No, to connect an extension cable to a cut lightstrip, you will need to first use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Will Litcessory products cause my Philips Hue Lightstrip Plus to be dimmer?
No, Litcessory products do not affect the brightness of the lights. As long as your total lightstrip run length (lightstrip length plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!
Philips says their lightstrips are expandable to a maximum of 10 meters/33 feet. If I use an extension cable or ethernet cable, does this affect the 10 meter/33 foot limit?
We recommend keeping your total lightstrip run under 10 meters/33 feet. This includes the total length of your lightstrips and any Litcessory products and ethernet cables. Some customers have reported success going over this limit, however we have not tested this.
Do Litcessory extension cables have LED lights on them?
No, Litcessory products do not have any LED lights.
I have a cut Philips Hue lightstrip and I need to add a Litcessory extension cable and connect another cut Philips Hue lightstrip. How do I do this?
To connect two cut lightstrips together with a Litcessory Extension Cable, you will need to use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
- Connect the cut-end connector side of the cable to the cut lightstrip.
- Plug the extension cable into the 6-pin side of the 6-Pin to Cut-End Connector.
- Connect a second 6-Pin to Cut-End Connector to the other cut lightstrip
Can I plug an extension cable into a Cut-End Connector?
No, to connect an extension cable to a cut lightstrip, you will need to first use one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector, or a 6-Pin to Cut-End Connector (Solder-On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Can I cut a Litcessory Extension Cable to a custom length?
No. Litcessory offers several lengths to choose from. Consider using an RJ45 to 6-Pin Ethernet Cable Adapter to use a self-provided custom Ethernet cable for a custom length extension cable.
What is reverse polarity, and how do I fix it?
Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed. Please take a look at our Troubleshooting Video.
How do I know which version of the Controller to 6-Pin Adapter to choose?
The Philips Hue Plus has two controller versions: a detachable version and a hardwired version. Please see the image below to identify which controller version you have.
How do I extend the distance between the controller and the lightstrip?
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
I connected the Controller to 6-Pin Adapter to my controller and then I plugged in an extension cable to the Controller to 6-Pin Adapter. How do I connect the original starter lightstrip?
Our Controller to 6-Pin Adapter comes in a set of two; one for your controller and the other for your original starter lightstrip. To connect to the original starter lightstrip, just use the second controller to 6-pin adapter included in the pack.
What is reverse polarity, and how do I fix it?
Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed. Please take a look at our Troubleshooting Video.
Will Litcessory products cause my Philips Hue Lightstrip Plus to be dimmer?
No, Litcessory products do not affect the brightness of the lights. As long as your total lightstrip run length (lightstrip length plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!
Philips says their lightstrips are expandable to a maximum of 10 meters/33 feet. If I use an extension cable or ethernet cable, does this affect the 10 meter/33 foot limit?
We recommend keeping your total lightstrip run under 10 meters/33 feet. This includes the total length of your lightstrips and any Litcessory products and ethernet cables. Some customers have reported success going over this limit, however we have not tested this.
How many times can I split? I want to connect 3+ extensions using splitters, will that work?
Yes, you will need to connect an additional splitter to the splitter to create the number of connections you need.
Can I split cut ends?
Yes, you can do that by using first converting your cut-end into a 6-pin end by using one of our 6-pin to cut-end products: a 6-Pin to Cut-End Extension Connector, a 6-Pin to Cut-End Connector or a 6-Pin to Cut-End Connector (Solder On). This will allow you to convert the cut end of the lightstrip into a 6-pin connector.
Will Litcessory products cause my Philips Hue Lightstrip Plus to be dimmer?
No, Litcessory products do not affect the brightness of the lights. As long as your total lightstrip run length (lightstrip length plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!
Philips says their lightstrips are expandable to a maximum of 10 meters/33 feet. If I use an extension cable or ethernet cable, does this affect the 10 meter/33 foot limit?
We recommend keeping your total lightstrip run under 10 meters/33 feet. This includes the total length of your lightstrips and any Litcessory products and ethernet cables. Some customers have reported success going over this limit, however we have not tested this.
Can I cut a Litcessory Extension Cable to a custom length?
No. Litcessory offers several lengths to choose from. Consider using an RJ45 to 6-Pin Ethernet Cable Adapter to use a self-provided custom Ethernet cable for a custom length extension cable.
What is reverse polarity, and how do I fix it?
Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed. Please take a look at our Troubleshooting Video.
Configure your selection
Secure Payments
Copyright Litcessory. All rights reserved.