6-Pin to 6-Pin Connector
Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several! This 6-pin to 6-pin connector, specifically designed for the Philips Hue Lightstrip system, allow for the conversion of any female 6-pin end to a male 6-pin end. Simply insert a pin connector into a female 6-pin end to convert it to a male end. This product is great for
MADE FOR INDOOR DRY LOCATIONS ONLY |
|---|
Configure Your Selection:
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
 |
|---|
 |
|---|
 |
|---|
 |
|---|
 |
|---|
Philips Hue Compatible >
6-Pin to 6-Pin Connector
Configure Your Selection:
Configure Your Selection:
This 6-pin to 6-pin connector, specifically designed for the Philips Hue Lightstrip system, allow for the conversion of any female 6-pin end to a male 6-pin end. Simply insert a pin connector into a female 6-pin end to convert it to a male end.
This product is great for:
- Converting the female end of an extension cable or lightstrip to a male end
General Questions:
This happens most often when a 6-pin connector or lightstrip is plugged in upside down, causing something called reverse polarity. To fix this, simply flip over the connector or lightstrip and plug it in the other way.
No, Litcessory extension cables do not have any LED lights.
If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the solder points on the lightstrips. Try the following:
- Unplug the power source
- Ensure the backside of the solder points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that the cut-end of the lightstrip is fully inserted.
- Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
- To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.
If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!
To extend the distance between the controller and the lightstrip, you will first need to connect one of our Controller to 6-Pin Adapters. Then you can plug in an extension cable.
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
