Accessories for Philips Hue's new Bluetooth V4 lightstrip now available (cut-end products coming soon)!

Accessories for Philips Hue's new Bluetooth V4 lightstrip now available (cut-end products coming soon)!

How to Use It

Cut It

in middle of solder points

Insert

lightstrip after opening connector

Close

connector

Mount

lightstrip in desired area

Plug

into USB

NOTE: Most USB ports located on TVs/monitors are only powered when the TV/monitor is on. Check your TV/monitor settings to see if the USB port can be powered when the TV/monitor is off.

How to Reset the LumenX Controller

Step 1

Plug the controller into a 5V DC USB port (see example below).

Step 2

Once the lightstrip is on, power cycle the controller five (5) times in a row. Power cycling means to plug in the unit long enough for the lightstrip to turn on and then unplug the controller and wait for two (2) seconds.

You must unplug and replug within two seconds in order for this to work.

Step 3

Upon the fifth power cycle, the lightstrip will pulse blue four (4) times before resetting to white. This will indicate a successful reset.

How to Connect LumenX to the Philips Hue Bridge

Step 1

Plug the controller into a 5V DC USB port (see example below).

Step 2

If you haven’t already, download the Philips Hue App. Add the LumenX lightstrip to your system by tapping on the Settings icon at the bottom right hand corner.

Step 3

Tap Light Setup and then tap the Add Light button in the top left corner. Once on the Add screen, tap Search at the bottom center to connect the device. Select “Extended Color Light” once available.

The LumenX USB Controller should now be linked successfully.

How to Connect LumenX Using Samsung SmartThing

Step 1

Plug the controller into a 5V DC USB port (see example below).

Step 2

Add LumenX to the Samsung SmartThings App by tapping on the Add Icon in the top right corner.

Select the Device tab.

Tap “Scan nearby” to link the controller.

Step 3

After scanning is complete, light will link to SmartThings.

The LumenX USB Controller will now appear on the SmartThings My Home Page.

The LumenX USB Controller should now be linked successfully.

How to Connect LumenX Using Google Assistant

Connect LumenX to a Zigbee compatible Smart Light Bridge for control via Google Assistant. (Example: Philips Hue Bridge or Samsung SmartThings Hub)

How to Connect LumenX Using Amazon Alexa

Connect LumenX to a Zigbee compatible Smart Light Bridge for control via Alexa. (Example: Philips Hue Bridge or Samsung SmartThings Hub)

Questions? Need Help?
lumenxlighting.com
[email protected]

X
0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping
      Apply Coupon